Ford YT16 1983-1993 Timeline



I own 3 YT16s a 1985, 1989 and 1990,
Here’s info on them
Distributor: Ford
Manufacturer: Gilson (1983-1988)
Lawnboy (1989-1993)
Original price (USD)
$2,500 (1985 )
Engine:
16hp Briggs and Stratton Twin Cylinder 402707 655cc (1983-1989)
16hp Kohler Twin Cylinder Magnum MV16 691cc (1990-1993)

Attachments for the YT-16 included a 26-inch rear-mounted tiller with 12-inch time and a 5-inch tilling depth. Two trailer-type lawn sweepers (31 and 38 inch) were available, as were and two dump carts. One was 6-cubic-feet with a 500-pound capacity, the other was 10-cubic-feet with an 800-pound capacity.

42″ Mower deck:
Type: mid-mount Ford
lift is manual or electric (optional)
Cutting width: 42 inches [106 cm]
Cut height: 1.5 to 3.5 inch [3 to 8 cm]

48″ Mower deck:
Type: mid-mount Ford
lift is manual or electric (optional)
Cutting width: 48 inches [121 cm]
Cut height: 1.5 to 3.5 inch [3 to 8 cm]

Blade:
Type: Ford
Width: 42 inches [106 cm]
Lift: manual
electric (optional)
Angle: manual

36″ Snow blower:
Type: front-mount Ford
single-stage
Clearing width: 36 inches [91 cm]
Lift: manual
electric (optional)

Copyright: Copyright 2015 TractorData

source

(3)

5 thoughts on “Ford YT16 1983-1993 Timeline

  1. I've got a Lt11, it has a damaged engine pulley, I'm having a hell of a time finding one, searched every graveyard around here. Any suggestions or part numbers? Thanks

  2. Great slideshow. I have a 90-93 . I turned it into an atv with a pulley swap and quad rear tires. It runs 12mph. I have some video's on my channel both before and after pulley swap. It goes most places my quad will go.

Leave a Reply

Your email address will not be published. Required fields are marked *