How To Adjust The Engine Speed On A Tecumseh Lawnmower Engine



In this video I show you how to increase or decrease the engine speed on a Tecumseh lawnmower engine with no throttle cable.
***Do this at your own Risk, over-revving the engine may cause it to have a catastrophic failure!***

Visit my channel for more repair videos;
http://www.youtube.com/user/donyboy73?feature=mhw5

source

(3)

How Splash Lubrication (Oil Slinger) Works in Briggs and Stratton Vertical Shaft Engines



Quick video on how splash lubrication works in Briggs and Stratton Vertical shaft engines. Shows how the oil slinger sits in the oil sump, and how the camshaft drives it. And basics of how the governor works, will get into more detail on governor operation in another video. This is not for engines with oil pumps, splash lubrication only. Thanks for watching.

source

(5)

How Throttle and Choke Linkage is Setup on a Briggs 2 piece Carburetor (NEW ENGINE)



Briggs and Stratton 13.5 HP I/C GOLD newer style 2 piece carburetor linkage setup. Thanks for watching!!!

source

(0)

How To Rebuild A Kohler Command Carburetor with Taryl



In “Loathe Thy Neighbor”, Slippers and his neighbor Ed take an interesting trip to the shop before Taryl shows you how to rebuild a Kohler Command carburetor. He also covers carburetor kits for the Courage engine and how to install the needle and seat. And There’s Your Dinner!!

**IMPORTANT PLEASE READ**: When Using Purple Power (as shown in this video) BE AWARE that some carburetors are a mixture of different alloy metals and the Purple Power will attack those alloys leaving a white chalky residue. So only soak the carburetor for a couple hours or so in order to avoid this. Although the chalky white substance on the carb WILL NOT hurt anything.

Please Subscribe to the channel and Thumbs Up our videos and be sure to ‘Like’ Us on Facebook for all the latest news and updates!

You can pick up all your TARYL APPAREL here: http://www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!

LIKE us on FACEBOOK! http://www.facebook.com/tarylfixesall
We’re on INSTAGRAM too! @tarylfixesall

source

(4)

HOW TO Easily Start Your Generator (Chinese Honda Clone) After Many Months In Storage



Having problems starting your chinese generator after many months in storage? This video shows you HOW TO Start Up Your Chinese Generator After Many Months In Storage. ALSO TIPS FOR STORING IT.
This is a Honda clone engine so same procedure can be applied to a Honda as well.

source

(6)

Small Engine Repair: How to Check for Spark on a Tecumseh, Honda, Briggs & Stratton Lawn Mower



Visit http://www.thesmallengineshop.net

**Always follow the instructions in your repair manual when doing repair or maintenance work on Outdoor Power Equipment. Manuals can be found at the manufacturers website.**

Most people check for proper engine spark by removing the spark plug, attaching the plug wire and grounding the plug to the engine while spinning the engine over and looking for a spark to jump across the spark plug gap. This method is not always reliable. The amount of voltage needed to jump the spark gap set at .030″ with the plug removed from the engine is about 2000 volts. The amount of voltage required to jump the same plug gap with the plug installed in the engine and operating under operating conditions is about 8000 volts, so it is possible to see a spark with the plug removed, but not have a spark with the plug installed.

A more reliable method is to remove the spark plug wire cap, and hold the spark plug wire approximately 3/16″ away from the spark plug and spin the engine over. A good ignition system will produce a orange/blue spark from the end of the spark plug wire to the spark plug. The problem with this method is it is easy to get shocked and hard to turn the engine over while trying to hold the end of the plug wire 3/16″ away from the plug. The benefit of this method is it is more reliable then the first method and doesn’t require purchasing any special tools.

Another method for checking the ignition for proper spark is to purchase the Briggs & Stratton Spark Tester, part #19368. This tool can be used to check for spark with the plug removed and using no hands, so the engine is easy to spin over and there is no risk of being shocked. The tool can also be used to view the spark while the engine is running. This is very valuable when trying to diagnose a rough running engine or a engine with intermittent problems.

Thank You For Watching!

source

(9)

Briggs & Stratton Governor Adjustment



WARNING! This video is for informational purposes only! Any modification to the governor assembly can result in engine failure, and/or personal injury.
DO NOT TRY THIS AT HOME!

Like me on Facebook!

https://www.facebook.com/fearlessfront

source

(8)

How To Properly Set the Governor On A Small Engine – With Taryl



In “Taryl Takes A Vacation”, another informative and comical how-to video, Taryl breaks up Junior’s film crew trying to film a how-to video without him before showing us the proper way to set the governor speed on a small engine. Taryl also gives you an in-depth, inside look on how a governor works. Now there’s your dinner!!

Please Subscribe to the channel and Thumbs Up our videos and be sure to ‘Like’ Us on Facebook for all the latest news and updates!

You can pick up all your TARYL APPAREL here: http://www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!

LIKE us on FACEBOOK! http://www.facebook.com/tarylfixesall
We’re on INSTAGRAM too! @tarylfixesall

source

(5)