Having problems starting your chinese generator after many months in storage? This video shows you HOW TO Start Up Your Chinese Generator After Many Months In Storage. ALSO TIPS FOR STORING IT.
This is a Honda clone engine so same procedure can be applied to a Honda as well.
This video I show the symptoms that’s involved with a Briggs single cylinder Intek engine that has a oil consumption problem brought on by a bad head gasket. you may also notice that there could be some oil leaking cost by the same problem of the headgasket pressurizing the oil crankcase causing weaker seals to allow oil to come out. however, the most prevalent symptom is burning oil roughly 4 to 8 ounces in 45 minutes of runtime at full throttle. I hope this helps out and good luck
I went to use my 21 year old Murray Select 22″ mower, I heard some knocking, a loud pop, then the engine stalled. I instantly suspected a connecting rod failure. I was correct. This video shows what happened and the repair I made.
**Still running fine as of 5/10/2015**
Thanks For Watching!
Please support this channel by SHARING, POSTING LINKS to my videos, SUBSCRIBING, and rating THUMBS UP.
Here is an instructional repair video for how to fix a Briggs and Stratton small engine that only runs off the primer. This applies to engines where the gas tank is attached directly underneath the carburetor.
While this video is intended to be informative and instructional, understand that your own repairs will be at your own risk.